OK, We will contact with you as soon as possible.

Reply to 2 floor: mine wont either

I had the same problem on a Jeep Grand Cherokee 2000, was only working in OBD2 mode. I had the same problem with many Dodge-Chrysler-Jeep older models, 2003 and below...

By the way, with version 4.10, maybe the version 5 will work? but I have problems running it.

Reply to 4 floor: Only OBDII works on Dodge and Chrysler, cant talk to ABS or anything else, updated to the latest version but still no good, anyone have a fix for this yet?

Hi, everyone above: .. could you guys name a specific car, model and year for this question? If you can provide a test path I will really appreciate it.

Just bought the Maxidas. Will not talk to my 2001 dodge ram 1500 5.2l 46re automatic. does get into abs. will not talk to ecm or tcm.

Hi every body, make sure you are using the chrysler adapter the black one some times the adapter does not come with the scanner has to be purchace , you will not be able to communicate with many diiferent modules depending on year make and models and one more thing software verssing 6.0 has fix most of the issues if not all and one more thing check for high voltage on the data line you could have a bad module not letting you connect with other modules in the same data line hope this helps you. good day

ps about unidentified control unit variant error message, ID:09120e0e that is a bad pcm replace the pcm write the vin number to the replacing pcm with the immobilizer disconnected done good luck.